181 Views
Looking at some comb pick I picked up from eBay for about $13 to see if I can get them to work on standard 5 pin 201 cylinders.
#LockPicking #CombPick #BypassLock
https://www.drlock.com.au/store/locksmith-tools-key-machines
source
Locksmith News & Information
Looking at some comb pick I picked up from eBay for about $13 to see if I can get them to work on standard 5 pin 201 cylinders.
#LockPicking #CombPick #BypassLock
https://www.drlock.com.au/store/locksmith-tools-key-machines
source
If the pins are to long it won't work
They have to be short enough to get above the shearline
The LW4 Lishi tools are pretty good on the new Lockwood 201 with all security pins.
Sit with a beer and a cylinder, learn what the feel is and you'll be able to crack them onsite pretty reliably.
I have a video on you tube opening an 'ABLE INNOX" using these comb picks. If cut them in half they easier to use.
I have had mixed success. But I think I would have more success if I have a thinner gauge of tool.
Can these be used for disk detainer locks?
Woow woow 😍💋 💝💖❤️
I've actually been working with the same set and another set of combs trying to open C4 profile locks. Like you've displayed they don't work very well out of the packet but with some tweaking with files they fit much better. I've had most success on ovals due to the long chambers but haven't opened a 530 kik yet.
Fantastic 😍💋 💝💖♥️❤️